Trash Talk Thursday: A Two Buck Sawbuck

A $1.00 folding wooden TV tray + a $1.00 cutting board = one easy 2 buck sawbuck! I combined these cheap thrift store finds to create some extra holiday baking space.
Newer cutting boards are usually constructed of 3 separate wood pieces. Wearing safety goggles, I wedged a flat head screwdriver between the seams & tapped with a hammer to gently separate the board panels, using the 2 end pieces to create storage space below the table.
I drilled holes through the boards into the TV tray legs, then attached the boards with wood screws. Although the wood practically matched, I opted to add 2 coats of flat black paint which I later sanded around the edges for an aged look.
© copyright 2012 redshedvintage.com
~ Check it out! This makeover of mine was featured in the Winter 2012 issue of A Primitive Place Magazine, page 81 ~

Before

 

  

 

Trash Talk Thursday: Not So Fruity Peg Rack

Watermelons and shaker pegs were both popular decorating motifs in the 1980’s, with this $1.00 thrift store score featuring plenty of both.

After sanding the painted melons with medium grit sandpaper, I covered the shelf with 2 coats of flat Federal Blue wall paint. When dry, I lightly sanded around the edges, then brushed off the paint dust. Noticing the carved half circles resembled bunting flags, I decided to cut & glue some paper flags from an old catalog.

Once the wood glue was completely dry, I gently wiped water-based wood stain over the entire surface with a cotton rag, for a time-worn (not so fruity)patriotic look.

Happy Summer!
copyright 2013 www.redshedvintage.com

 

 

 

Trash Talk Thursday: Mint It in Minutes

Minty shades of green are so cheerful. Whether you like primitives, farmhouse, cottage, shabby chic or whatever your home decor style preference, minty greens always look right at home. Right up there with the color red, shades of jade are some of my favorite colors to work with.
This inexpensive newer apothecary/bathroom cabinet ~ made of white coated particle board ~ was quickly transformed with just 2 quick coats of flat Jadeite wall paint, some fine grit sandpaper, and a hand-rubbed coat of walnut wood stain. copyright 2013 www.redshedvintage.com



Before ~ inexpensive Salvation Army Thrift Store bathroom cabinet find
Here's another minty do-over (photos below) and a link to directions for painting/distressing on: my painting tutorial on youtube ~ which also featured a minty makeover. Have a great week, fellow junquers!

Before
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Trash Talk Thursday Tutorial: Painting & Distressing Vintage Furniture

If you've been wanting to revive some scratched up old furniture but thought you needed fancy paint products or kits, read on!
As we prepared to move into a bright new townhouse, I had decided it was time to do some furniture painting of my own. First on the list was reviving the scratched up hand-me-down 1950's 4-piece bedroom furniture set! 

 

 Inexpensive items used for my overhaul:
Flat charcoal wall paint ($3.00 gallon 'oops' paint from Walmart, even better!)
Ace Hardware Oil Based Wood Stain & Sealer
Paintbrushes, cotton rags

If you don't know whether or not your furniture piece is a valuable antique, you might want to get some advice from a professional antique dealer before painting or altering the finish. Some clues as to an item's age can sometimes be found on the back or bottom of the piece, in the form of a furniture company or store sticker, stamp, or product #. Machine or factory manufactured furniture pieces usually have some sort of company logo. You might also notice square/rectangular old nails instead of newer round nails in the joints; phillip's head screws instead of flat ones; or note whether the drawers were machine or hand dovetailed to better guess an item's age. Until the1880's, dovetailed corner joints were hand cut with chisel and hammer (crooked, with cuts varying in size & shape, not uniform.) After the 1880's, many furniture companies mass-produced furniture with industrial machines, including machine-cut dovetailed joints (uniform in size & shape.) Keep in mind that machine dovetailed pieces are still being made nowadays, even some inexpensive Ikea products have machine dovetailed edges. Here are 2 dovetailed drawer examples:

Hand dovetailed antique 1800's drawer joint (left) and machine dovetailed (right) vintage 1950's drawer joint

Once you've determined that your furniture isn't a rare priceless antique, wipe the surface with a lightly dampened wash cloth to clean for painting, and allow the surface to dry. I like using flat wall paint because I prefer a non-shiny surface, but you can test whatever paint you'd like to use on a small area. Decide whether you want to remove the hardware to retain the original finish, or leave it on for painting. I liked the patina on the brass drawer pulls, so I removed them & soaked in warm water with a little squirt of dishwashing soap.

Using a paintbrush, apply 2 light coats of paint in the same direction ~ allowing drying time between coats. When paint has completely dried, you can add some distressed age if you'd like ~ either by hand or with an electric mouse sander ~ using fine grit sandpaper (skip this step if you'd prefer a neater look). Wearing a painter's mask & protective eye ware, lightly sand around the edges and/or where ware would be most likely to occur naturally from years of use.

Once you're happy with the distressed finish, very gently wipe the dust with a slightly damp cotton rag, using single strokes to avoid lifting the paint off the surface. If you find that you've rubbed too vigorously, stop and add some paint over the peeling paint, allowing time for the patched areas to dry.

Once the piece is dry and free of debris, you can seal & darken the finish by applying a hand-rubbed coat of oil based wood stain. I prefer to use 'natural' colored stain over dark paint colors, or 'walnut' over light paint colors; experiment on a paint stirrer to see which you prefer. Wearing gloves, dip a clean (lint free) cotton rag into the stain, then apply even strokes in the same direction over the painted surface. You might want to use a small paintbrush, sponge, or q-tip to get the stain into crevices and corners. Wipe excess stain, and allow a few days drying time ~ preferably somewhere with low humidity. Reattach hardware, and enjoy several more years of use! If you decide you don't like the color or finish, just start all over again with a different color. (Note: for my video tutorial showing this process on a much smaller project, click here)

As someone who usually paints/distresses/antiques vintage primitives of a much smaller nature, I must say that I have a newly gained appreciation for those who refinish big furniture for a living! Between lugging the pieces back and forth to my workshop and crawling around on the concrete floor to paint & stain, I'm feeling mighty sore after just this one set of furniture.
I even treated myself to a manicure when the hefty chore was finally finished ~ can you guess what color nails I chose?  Have a great week, everyone...

Trash to Treasure fingers, aaaah

 

 

 Some other painted furniture projects I tackled:

Reproduction 1950's hurricane table before

After!

 

Reproduction dry sink before

After!

Dough box end tables updated with blue bottoms